What to consider when installing gutter downspouts

  What issues to consider when installing gutter downspouts, which are gutters that collect rainwater along both sides of the length of the roof gutter to direct stormwater runoff on the roof. In fact, it is not easy for gutter manufacturers to install gutters. They need to consider many issues, the first consideration is the design drawings.

After the correct drainage ditch is selected, it will be transported to a specific location using a machine. During this time, the weight and size of the drain should be considered. Once the location is determined, a temporary connection using the welder used by ZHUAN is required. After all materials are transported to the site, they are installed. All the side beams inside and outside the gutter are adjusted to a uniform straight line to make the welded edges smaller. Eaves gutter

When welding gutter, the current used in welding should also be considered. Z is mainly worried about the problem of too much current to avoid more serious consequences. Therefore, only after all the programs are prepared, there will be no errors during the installation process.

　　We know that gutters are an important part of the roof drainage system. The gutter is mainly used to collect rainwater temporarily, and the rainwater is discharged in time through the downspout. Try to use external gutters, which are small in size and can also be used as cornice decoration. The right color, delicate gutters and finishes may add color to the decorative effect of the entire project. How to choose the size of the gutter downspout for the day?

　　The size of the gutter is usually determined by the width of the opening on the gutter, which is also an important dimensional parameter. Gutter depth, bottom width, and other dimensions vary in proportion to the width of the upper opening of the gutter. If the product specification is K5.5, it means that the width of the upper opening is 5.5 inches, and other similar; The inch is 25.4mm, the K5.5 is 135mm, the K6 is 152mm, the K7 is 180mm, and the K8 is 200mm (see product drawings for specific dimensions). Eaves gutterWhen choosing the gutter size, it should be noted that the opening size and height of the gutter should match the height of the cornice. The cornice of Chinese cement structure house is thicker (compared with foreign wood structure), so the size above 5.5 inches should be selected; In some luxurious small and large houses (large overhanging eaves, thick cornice), multi-storey and co-built clubs and other buildings, the size of 6.5 inches and 7 inches should be selected to ensure the harmony between the size of the water and the appearance of the building. However, some publicbuildings and buildings have high requirements for the decoration of the cornice, and you can choose a double-layer decorative cornice gutter to integrate the drainage and decoration of the gutter downspout.